Came AXO is an electromechanical motor used especially for automating large gates. The AXO AX71230 can operate on gates wide up to 7 m. The maximum weight is 1000 kg.
Came AXO is an electromechanical motor used especially for automating large gates. The AXO AX71230 can operate on gates wide up to 7 m. The maximum weight is 1000 kg.
This motor isn't self-locking, therefore you will require an electric lock CAME LOCK 81 in order to block the gate in the closed position.
| BASIC INFORMATION | |
| Motor power supply | 230V |
| Leaf maximum width | 7 m |
| Leaf maximum weight | 1000 kg |
| D-Dimension | 5 cm |
| Motor type | electronmechanical |
| MOTOR TECHNICAL DATA | |
| Power Supply | 230/230 V |
| Current draw | 1,5 A |
| Max Power | 175 W |
| Duty cycle | 30% |
| Traction force | 4500 N |
| Motor thermal protection | 150° C |
| Opening time (90°) | 40 s |
| Maximum opening angle | 120° |
| Operating temperature | -20° + 50°C |
| Protection rating | IP44 |
| Self-locking | no |
| Limit switches for opening | yes |
| Limit switches for closing | yes |
| Encoder | yes |
| BASIC CONTROL BOARD FUNCTIONS | |
| Second line of photocells | yes |
| Pedestrian passage function | yes |
| Electrolock connection | yes |
| Amperometric sensor | yes |
| Running time adjustment | yes |
| Force adjustment | yes |
| Pre-Flashing of the warning light | yes |
| Automatic closing | yes |
| Soft-stop, soft-start | yes/yes |
| This kit contains |
| - 1 x Came AXO AX71230 motor - 1 x Came unit ZM3E - 1 x Frequency card TAF43S - 2 x Came Top 432EV remote - 1 x Pair of Came DELTA-E photocells - 1 x Atenna CAME A433 - 1 x Manual - 1 x Invoice (19% of tax incl.) |
Data sheet
EU manufacturer/responsible person
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Came AXO is an electromechanical motor used especially for automating large gates. The AXO AX71230 can operate on gates wide up to 7 m. The maximum weight is 1000 kg.
